Difusor de aromas M6000 para sistemas de climatización comercial

La cobertura depende de tres condiciones del lugar: la altura del techo, el flujo de aire del sistema de climatización cuando la máquina está conectada a los conductos y el nivel de ventilación de la habitación. Una habitación cerrada con un fuerte chorro de aire de suministro alcanza el límite superior; un espacio con techo alto o muy bien ventilado se acerca más al límite inferior. Envíanos la altura del techo y el plano de la habitación y te confirmaremos la cifra correspondiente a tu proyecto.

Divide el volumen entre la altura del techo. Con un techo de 3 m / 9.84 pies: aproximadamente 2000–2667 m² / 21 528–28 704 pies². Con una altura de 4 m / 13,12 pies: aproximadamente entre 1500 y 2000 m² / 16 146 y 21 528 pies². Con una altura de 5 m / 16,40 pies: aproximadamente 1200–1600 m² / 12 917–17 222 pies².

Agrega unidades cuando las paredes, puertas o divisiones dividan el espacio en zonas de aire separadas, ya que la fragancia no puede atravesar una puerta cerrada; la regla general es una unidad M6000 por cada zona de 6000 a 8000 m³. En una sola sala abierta, una unidad con conductos y salidas bien espaciadas normalmente cubre todo el volumen. Contáctanos con un plano de planta para que te indiquemos el número de unidades y la distribución de las salidas.

Una máquina común del mercado tiene un alcance de aproximadamente 300 m³; la M6000, con un alcance de 6000 a 8000 m³, es entre 20 y 27 veces mayor, y además cuenta con dos bombas, dos botellas y conexión a conductos de climatización, características que las pequeñas unidades de escritorio no tienen. Si buscas una máquina para metal de un solo depósito con una capacidad menor, compara el resto de nuestra línea de difusores para metal.

Yes. Each nozzle has its own air pump, its own control panel and its own bottle, so the two sides are fully independent scenting zones. Two different scents can run simultaneously on different weekly schedules — for example a fresh lobby scent and a warmer corridor scent.

Slide each 1000 ml bottle into its holder at the side of the machine and connect its small pipe; the bottles stay outside the housing, so refilling or swapping a scent is done in place without moving the unit. Refill with pure essential oil using a funnel, then reconnect the pipe.

Use pure essential oil, aroma oil or fragrance oil — waterless, with no dilution. We can run a compatibility test on customer-supplied oil before a branded order. Low-viscosity oils formulated for commercial and HVAC diffusers atomize best; very thick oils and carrier-oil blends mist more lightly and can narrow the tube over time.

The scents do not mix inside the machine because each side has a separate pump, pipe, bottle and nozzle; they only meet after leaving the outlets with the room air. Either side can be switched off independently, so the M6000 can also be used as a single-scent machine with the second bottle as reserve.

The box contains two large pipes and two small pipes, four in total. The small pipes run from the back of the machine to the bottle holders; the large pipes fit above the bottle holders and their other ends connect into the air-conditioning supply or return duct. Insert each pipe fully into its fitting before running the unit.

Cut an opening into the supply or return duct, secure the large pipes to the duct with clamps, route the small pipes to the bottles, then plug in the DC adapter and set the schedule from each panel. We recommend having a licensed HVAC technician carry out the duct work; typical installation takes about 30–45 minutes once the duct position is chosen.

Yes. It can stand free on the floor or a sturdy surface, or be wall-mounted; in both modes the dual nozzles scent the room directly. Duct connection is only needed when you want fragrance distributed through the building's own air system to multiple rooms.

The supplier installation reference shows up to five outlet points from one ducted unit. The practical number depends on duct length and fan pressure; for long duct runs or outlets spread across several floors, contact us to confirm sizing so fragrance stays even at every outlet.

Each zone is set separately with its CYCLE, MODE, SET, UP and DOWN buttons: choose the days (Monday to Sunday shown on the panel), set the working period such as 08:00–22:00, set the spray interval, then choose the concentration level. The schedule repeats weekly until changed.

Install the companion app on your phone, enable Bluetooth, and pair with the machine from the app to control schedules and scent levels from the phone. There is no subscription fee, and multiple phones or staff members can be given access for sites such as hotel chains. Bluetooth works within phone range of the machine.

Yes. Schedules are stored on the machine itself, so once the weekly program is set from the panel it runs independently, with no phone present and no internet connection. The Bluetooth APP is an alternative way to control the unit, not a requirement for operation; WiFi control is not supported.

USD EXW per piece: sample 1 pc at $80.00; 10–49 units at $80.29; 50–999 units at $71.65; 1000 or more units at $69.79. There is no MOQ, so a sample or trial order is welcome; freight and import duty are not included.

OEM covers laser-engraved logo on the aluminum housing, custom packaging and a branded manual; there is no MOQ for standard units and small customization batches are accepted. Send your logo file and the quantities you need and we will confirm customization details and lead time on the quotation.

The M6000 is built to CE and RoHS, with certificate copies provided with the order, and carries a 1-year warranty backed by online technical support. Replacement wear parts — pumps, nozzles, pipes and control boards — can be supplied after the order; contact us for availability and shipping.